Rear subframe rust woes.
- mustard
- Regular player
- Posts: 572
- Joined: Thu Feb 11, 2010 10:43 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Location: saff east london
- Has thanked: 0
- Been thanked: 0
Re: Rear subframe rust woes.
i just had a thought how would you ensure it don't happen to your car? i recommend get rid of any surface rust, then zinc primer it and give it a coat of paint ie hammerite then waxyol it but ensure your brake components are covered up before you do it. i will probably be stripping and hammeriting mine in the spring so will upload pictures when i do it.
Mustard...Nice & Hot.
- mustard
- Regular player
- Posts: 572
- Joined: Thu Feb 11, 2010 10:43 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Location: saff east london
- Has thanked: 0
- Been thanked: 0
Re: Rear subframe rust woes.
How many jobs that had to be done were we have cuts, bruises and skin go missing ??? but it is always worth it as you know the job has been done properly, you won't have to do it again and will it last for years. top job mate ![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
Mustard...Nice & Hot.
-
- Advice star
- Posts: 2070
- Joined: Sat Sep 01, 2012 4:36 am
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Has thanked: 3 times
- Been thanked: 9 times
Re: Rear subframe rust woes.
Cheers RIk, you've inspired me to have a crack at it and see what mot guy has to say about it in a few months..top job, it looks like you've caught it in time ![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
-
- Advice star
- Posts: 2070
- Joined: Sat Sep 01, 2012 4:36 am
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Has thanked: 3 times
- Been thanked: 9 times
Re: Rear subframe rust woes.
One thing.. If you need to jack the car up from the rear crossmember be sure to spread the load as much as possible with a piece of 2x2 as jacking from a small contact area is asking for trouble ...if just jackin one wheel my fave place is the smallish area at swinging arm mount again with 2x2 to spread the load..
With my next crossmember I'm going to fill with hot wax oil and turps mix , seal all cavities and give a good slosh around, drain any excess,, wire brush exterior,, kurust,,Hammerite , then wax oil , refitting will be a doddle as the hard work is removing it,, patience is the key to not mashing it up.![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)
With my next crossmember I'm going to fill with hot wax oil and turps mix , seal all cavities and give a good slosh around, drain any excess,, wire brush exterior,, kurust,,Hammerite , then wax oil , refitting will be a doddle as the hard work is removing it,, patience is the key to not mashing it up.
![Thumb Up Left :handgestures-thumbupleft:](./images/smilies/handgestures/thumbupleft.gif)