Hi guys,
I'm new to this forum but not new to Hyundai Coupe. I have SIII 2.0 CVVT.
One of major motivators to join the board is my DTC code P0011 Timing Over-Advanced that I can't seem to get rid off and it's driving me nuts.
Car has 70k miles and in case anyone is interested, here's is what's been done:
-------------------------------------------------------------------------------------------------------
1. 3 different OCVs put in and checked for resistance and operation on 12V
2. New cam sensor OEM //1 month ago
3. New CVVT Assy OEM // last week
4. New Mobil 1 5W30 Oil // last week
5. Hyundai original oil filter // last week
6. New OCV filter OEM // last week
6. Cleaned oil pan and flushed engine with BG engine restoration // 6 months ago
7. Timing belt changed //1 year ago or 10k miles ago
8. New OTS (oil temperature sensor)
9. Sprayed canned air all over CVVT ducts and no slude came out(all clean)
New to the forum
Forum rules
YOU NEED TO SAY HELLO HERE TO SEE ALL OF THE SITE.
PLEASE DONT ASK QUESTIONS HERE
THIS SECTION IS ONLY TO SAY HELLO. PLEASE REMEMBER YOU ARE NOT PERMITTED TO SELL PARTS OR CARS UNTIL YOU HAVE 25 POSTS. THIS IS TO PROTECT HCOC MEMBERS.
IF YOU DO NOT SAY HELLO IMMEDIATELY YOUR ACCOUNT MAY BE DELETED
YOU NEED TO SAY HELLO HERE TO SEE ALL OF THE SITE.
PLEASE DONT ASK QUESTIONS HERE
THIS SECTION IS ONLY TO SAY HELLO. PLEASE REMEMBER YOU ARE NOT PERMITTED TO SELL PARTS OR CARS UNTIL YOU HAVE 25 POSTS. THIS IS TO PROTECT HCOC MEMBERS.
IF YOU DO NOT SAY HELLO IMMEDIATELY YOUR ACCOUNT MAY BE DELETED
- robbo
- Club Supervisor
- Posts: 3423
- Joined: Fri Sep 06, 2013 9:10 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Engine: 2.0
- +_number: 0026
- Has thanked: 18 times
- Been thanked: 92 times
- Contact:
Re: New to the forum
Starting with the obvious has the static timing been checked to make sure it’s set properly?
I didn’t think coupes had an oil temp sensor tbh, just a pressure sensor.
We recommend using 10/40 semi synthetic oil as the engines seem to run better on it
Sent from my iPhone using Tapatalk
I didn’t think coupes had an oil temp sensor tbh, just a pressure sensor.
We recommend using 10/40 semi synthetic oil as the engines seem to run better on it
Sent from my iPhone using Tapatalk
My F2 Evo build
Member #0026: Never knowingly under polished
Member #0026: Never knowingly under polished
-
- Searching in the dark
- Posts: 3
- Joined: Wed Nov 28, 2018 7:01 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 2 times
- Been thanked: 0
Re: New to the forum
@robo thanks for fast reply, really apprechiated!
Actually, the oil temp. sensor is small pigtail sensor just below the OCV valve and it compensates PWM signal for OCV depending on oil temp.
Timing belt was set by Hyundai specialised mechanic and car runs with no other issues so I would asume the static timing is OK.
Also after a belt change, there was no MIL or DTC for 8-9 months so I guess that is solid. I've been a number of times at mechanic garage taking off the valve cover etc. and we can't figure it out.
10/40 would that really make such a difference? I tried 5w40 (shell full synt) but surly can try 10w40 on next oil change which I do every 5k at most.
Any other ideas apprechiated...
Actually, the oil temp. sensor is small pigtail sensor just below the OCV valve and it compensates PWM signal for OCV depending on oil temp.
Timing belt was set by Hyundai specialised mechanic and car runs with no other issues so I would asume the static timing is OK.
Also after a belt change, there was no MIL or DTC for 8-9 months so I guess that is solid. I've been a number of times at mechanic garage taking off the valve cover etc. and we can't figure it out.
10/40 would that really make such a difference? I tried 5w40 (shell full synt) but surly can try 10w40 on next oil change which I do every 5k at most.
Any other ideas apprechiated...
- Rick
- Club manager
- Posts: 9197
- Joined: Mon Feb 08, 2010 7:34 pm
- Real Name:
- Coupe: Gen3.5
- Engine: 2.0
- Location: Bristol U.K.
- +_number: 1701
- Has thanked: 23 times
- Been thanked: 206 times
- robbo
- Club Supervisor
- Posts: 3423
- Joined: Fri Sep 06, 2013 9:10 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Engine: 2.0
- +_number: 0026
- Has thanked: 18 times
- Been thanked: 92 times
- Contact:
Re: New to the forum
Ah fair enough, my old classic coupe doesn’t have such fancy things
Looks like you’ve tried everything tbh, the ecu itself could be at fault, it might be thinking it’s seeing a fault that isn’t there
Might be worth giving ross at tiburon automotive a ring as he might have some other ideas
Sent from my iPhone using Tapatalk
Looks like you’ve tried everything tbh, the ecu itself could be at fault, it might be thinking it’s seeing a fault that isn’t there
Might be worth giving ross at tiburon automotive a ring as he might have some other ideas
Sent from my iPhone using Tapatalk
My F2 Evo build
Member #0026: Never knowingly under polished
Member #0026: Never knowingly under polished
- Mike.Lawre
- Club manager
- Posts: 7653
- Joined: Wed Sep 12, 2012 3:22 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Location: Cookley Worcs.
- +_number: 0003
- Has thanked: 32 times
- Been thanked: 161 times
Re: New to the forum
Founder member of "The Grumpy Old Men's Section"
Find me at The Rose Theatre http://rosetheatre.co.uk
Find me at The Rose Theatre http://rosetheatre.co.uk
-
- Searching in the dark
- Posts: 3
- Joined: Wed Nov 28, 2018 7:01 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 2 times
- Been thanked: 0
Re: New to the forum
Thank you all for replys!
I sent an email to Tiburon Automotive. Hopefully he'll reply.
In case that somebody got some other ideas please shoot. This is my last freeze frame (moment when DTC popped in pendig state):
I sent an email to Tiburon Automotive. Hopefully he'll reply.
In case that somebody got some other ideas please shoot. This is my last freeze frame (moment when DTC popped in pendig state):