that's pretty much how i imagine it to be, still a one size fits all type map, just with certain figures moved up the range a tad like the timing advance.JonGTR wrote:I highly doubt he can/will modify this ECU to your mods unless he's done extensive dynos with members and various mods to determine what the car likes to see in the a/f chart with said mods. What I think he would most likely do is lean the whole map out a little due to Hyundai running these motors pretty rich from the factory. That's across the board on their whole lineup since 1995.
Another option for him is to advance timing, or "allow" the adaptive timing to advance further. Hyundai has the ECU programmed so that no matter what fuel you use, the timing will only advance so far. The knock sensor will retard it with bad fuel, but advancing is limited to a point. You can take advantage of all kinds of fuels if this was done, including ethanol.
Also, removing the rev limiter is a BIG plus with the 2.0L and 2.7L since modifications tend to shift the power closer to and even beyond 7krpm.
REMAP NOW AVAILABLE
- robbo
- Club Supervisor
- Posts: 3423
- Joined: Fri Sep 06, 2013 9:10 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Engine: 2.0
- +_number: 0026
- Has thanked: 18 times
- Been thanked: 92 times
- Contact:
Re: REMAP NOW AVAILABLE
My F2 Evo build
Member #0026: Never knowingly under polished
Member #0026: Never knowingly under polished
- ImGoingSpace
- Facebook support
- Posts: 1864
- Joined: Sat Feb 06, 2016 7:07 pm
- Real Name:
- Coupe: Gen2 (1999-2001)
- Engine: 2.0
- Location: Thatcham
- Has thanked: 13 times
- Been thanked: 24 times
Re: REMAP NOW AVAILABLE
Its also worth noting that ross doesnt modify the map himself, he sends it off to be done
Sent from my SM-G900F using Tapatalk
Sent from my SM-G900F using Tapatalk
- MJNewton
- Getting noticed
- Posts: 907
- Joined: Sat Jun 09, 2012 10:43 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 12 times
- Contact:
Re: REMAP NOW AVAILABLE
What was the setup on the bench for?
(...and does this mean we can cut out the middle man and send it direct?! )
(...and does this mean we can cut out the middle man and send it direct?! )
- ImGoingSpace
- Facebook support
- Posts: 1864
- Joined: Sat Feb 06, 2016 7:07 pm
- Real Name:
- Coupe: Gen2 (1999-2001)
- Engine: 2.0
- Location: Thatcham
- Has thanked: 13 times
- Been thanked: 24 times
Re: REMAP NOW AVAILABLE
If you want to send it to switzerland (or sweden, i forget) be my guest.
Ross just accesses the cpu, copies from it, sends it off then does the overwrite.
Sent from my SM-G900F using Tapatalk
Ross just accesses the cpu, copies from it, sends it off then does the overwrite.
Sent from my SM-G900F using Tapatalk
- MJNewton
- Getting noticed
- Posts: 907
- Joined: Sat Jun 09, 2012 10:43 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 12 times
- Contact:
Re: REMAP NOW AVAILABLE
Gotcha. I misunderstood what you said and thought he was sending the ECU itself off elsewhere. (Having re-read your post I'm not sure how I reached this conclusion)
- GRV6
- Running around headless
- Posts: 203
- Joined: Tue Aug 18, 2015 8:45 am
- Real Name:
- Coupe: Gen3.5
- Engine: 2.7(v6)
- Has thanked: 1 time
- Been thanked: 1 time
Re: REMAP NOW AVAILABLE
Had this discussion when I mapped mine.... but if I can remember correctly, the ECU chip is soldered AND GLUED on the GB coupe's right? so removing them wil risk braking the ecu chip??
BTW: when removed, the remap can be performed and will stay on! Mine is the living proof of that!
BTW: when removed, the remap can be performed and will stay on! Mine is the living proof of that!
- MJNewton
- Getting noticed
- Posts: 907
- Joined: Sat Jun 09, 2012 10:43 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 12 times
- Contact:
Re: REMAP NOW AVAILABLE
Do you have before/after figures that can serve as the requisite temptation for the rest of us Gavin?
- ImGoingSpace
- Facebook support
- Posts: 1864
- Joined: Sat Feb 06, 2016 7:07 pm
- Real Name:
- Coupe: Gen2 (1999-2001)
- Engine: 2.0
- Location: Thatcham
- Has thanked: 13 times
- Been thanked: 24 times
Re: REMAP NOW AVAILABLE
He doesnt de-glue the chip afaik, hes figured the pinout on the rear of the board
- GRV6
- Running around headless
- Posts: 203
- Joined: Tue Aug 18, 2015 8:45 am
- Real Name:
- Coupe: Gen3.5
- Engine: 2.7(v6)
- Has thanked: 1 time
- Been thanked: 1 time
Re: REMAP NOW AVAILABLE
You can check on my topic: Project chiptuning gen 3.5 2.7 V6MJNewton wrote:Do you have before/after figures that can serve as the requisite temptation for the rest of us Gavin?
- MJNewton
- Getting noticed
- Posts: 907
- Joined: Sat Jun 09, 2012 10:43 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 6 times
- Been thanked: 12 times
- Contact:
Re: REMAP NOW AVAILABLE
Thanks Gavin - an interesting read!
- Carlsberg
- Tuscani owners club
- Posts: 3182
- Joined: Sat Sep 01, 2012 9:02 am
- Real Name:
- Coupe: Non-Coupe
- Engine: 2.7(v6)
- Location: Worcester
- +_number: 1985
- Has thanked: 0
- Been thanked: 19 times
Re: REMAP NOW AVAILABLE
Mine is booked in on the 3rd of March. Will be leaving the car with him for the day and then picking it up the following day
-
- Settling down
- Posts: 139
- Joined: Wed Apr 20, 2016 1:23 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Has thanked: 1 time
- Been thanked: 4 times
Re: REMAP NOW AVAILABLE
A better option in my opinion, will be interested in your feedback on how it performs.Carlsberg wrote:Mine is booked in on the 3rd of March. Will be leaving the car with him for the day and then picking it up the following day
- Lexo
- Club Supervisor
- Posts: 6626
- Joined: Sun Sep 23, 2012 10:55 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Location: Edinburgh
- +_number: 111
- Has thanked: 18 times
- Been thanked: 97 times
- Contact:
Re: REMAP NOW AVAILABLE
I may have to wait for your trip then Carlsberg and see what you think.
Probably take that long before weather up here when I have a day off to get the ECU out happens anyway
Probably take that long before weather up here when I have a day off to get the ECU out happens anyway
smokebelch wrote:I'm sure some Reebok classic wearing chav will love the whole look you've got going on
- Carlsberg
- Tuscani owners club
- Posts: 3182
- Joined: Sat Sep 01, 2012 9:02 am
- Real Name:
- Coupe: Non-Coupe
- Engine: 2.7(v6)
- Location: Worcester
- +_number: 1985
- Has thanked: 0
- Been thanked: 19 times
Re: REMAP NOW AVAILABLE
As the coupe is my daily driver, I can afford to have one day off work to get it done. Couldn't send him my ECU
- Lexo
- Club Supervisor
- Posts: 6626
- Joined: Sun Sep 23, 2012 10:55 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 2.0
- Location: Edinburgh
- +_number: 111
- Has thanked: 18 times
- Been thanked: 97 times
- Contact:
Re: REMAP NOW AVAILABLE
3hr to do the job but he told me up to 2 weeks. Even factoring in 2-3 days each way for postage that's a massive difference
smokebelch wrote:I'm sure some Reebok classic wearing chav will love the whole look you've got going on
Re: REMAP NOW AVAILABLE
Maybe this question has already been asked but is there anywhere that does re-map for the 2.0 gen1
- robbo
- Club Supervisor
- Posts: 3423
- Joined: Fri Sep 06, 2013 9:10 pm
- Real Name:
- Coupe: Gen1 (1996 -1999)
- Engine: 2.0
- +_number: 0026
- Has thanked: 18 times
- Been thanked: 92 times
- Contact:
Re: REMAP NOW AVAILABLE
Not yet but I think Ross is looking into it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My F2 Evo build
Member #0026: Never knowingly under polished
Member #0026: Never knowingly under polished
-
- Finding my footing
- Posts: 21
- Joined: Mon Dec 26, 2016 4:01 pm
- Real Name:
- Coupe: Siii / TSiii
- Engine: 1.6
- Has thanked: 0
- Been thanked: 0
Re: REMAP NOW AVAILABLE
I'll be watching this thread closely.
I really need a power boost and this ECU remap seems the ticket to do so.
I have a bog standard 2007 1.6 coupe FX.
I think you guys class it as a Siii body type, but hoping something can be done in gaining a bit more power for this model.
While the 1.6 engine isn't that bad at hauling the weight of the coupe, those extra horses could mean all the difference.
I'd definitely be up for modding mine.
I really need a power boost and this ECU remap seems the ticket to do so.
I have a bog standard 2007 1.6 coupe FX.
I think you guys class it as a Siii body type, but hoping something can be done in gaining a bit more power for this model.
While the 1.6 engine isn't that bad at hauling the weight of the coupe, those extra horses could mean all the difference.
I'd definitely be up for modding mine.
- 01watts
- I'm getting good at this
- Posts: 48
- Joined: Sat Oct 31, 2015 4:50 pm
- Real Name:
- Coupe: Gen3.5
- Engine: 2.0
- Has thanked: 1 time
- Been thanked: 0
Re: REMAP NOW AVAILABLE
I'm picking mine up on the same day (4 March), maybe we'll be there at the same time!Carlsberg wrote:Mine is booked in on the 3rd of March. Will be leaving the car with him for the day and then picking it up the following day
- ImGoingSpace
- Facebook support
- Posts: 1864
- Joined: Sat Feb 06, 2016 7:07 pm
- Real Name:
- Coupe: Gen2 (1999-2001)
- Engine: 2.0
- Location: Thatcham
- Has thanked: 13 times
- Been thanked: 24 times